#Wol magic packet sender download how to
#Wol magic packet sender download install
#Wol magic packet sender download mac

In the properties of Internet Protocol (TCP/IP),.Subnetwork mask if it is not the local network.The IP address of the remote computer or router if it is not the local network.In RAC Client using the service Command Prompt

#Wol magic packet sender download mac

in RAC Client using the tool: DNS, IP, NetBios and MAC information in the Tools menu.

using the command ipconfig /all or getmac.

after starting the RAC Server in the dialog Communication Information in the Tools menu.

The version 2.05 of RAC Client and RAC Server.

#Wol magic packet sender download install

To the RAC service from RAC protocol version 1.15.23, namely that it is necessary to install The MAC address is automatically transferred from the remote computer when connecting

The physical address, the so-called MAC address of the remote computer.What do you need to know after switching the remote computer on (sending the Magic packet). With some routers you may use sending of the Magic packet through the web interface. That for the given IP address the router has a permanently assigned MAC address in the ARP (Address Resolution Protocol) table. Here you could use the redirection to an IP address under the condition

Some routers do not allow directing to the broadcast address or MAC address The broadcast address will be 192.168.1.255. Primarily this will be an address with the suffix of 255,Į.g. Or in RAC Client in the dialog Switching the Computer on Remotely Using the WOL (Wake on LAN) Feature after entering the local IP address and network mask. The broadcast address is found in the router settings NAT ( Network Address Translation, Port Forwarding, Virtual Server) on UDP ports 7, 9 or 5555 to the broadcast address of the inner network or MAC address of the remote computer. If the remote computer is connected through router, it is necessary to redirect the communication Within the Intranet or local network broadcasting on UDP ports 7, 9 or 5555 must not be forbidden. If you will start the computer through public Internet, the remote computer or router must have aįixed public IP address or can have a dynamic one if it has the DNS record.

The power source of the computer must be live so that the motherboard and the network adapterĪre powered in order to receive the Magic packet and the following switching the computer on.

The WOL (Wake On LAN) must be enabled in BIOS. If it is not an integrated adapter on motherboard it must be connected with the motherboard using a cable. The network adapter must support the WOL (Wake On LAN) feature. The following conditions must be met to receive the packet: The remote computer is switched on by sending so-called Magic packet to the remote computer. Using an network adapter supporting the WOL (Wake On LAN) feature it is possible to switch a computer on

#Wol magic packet sender download how to

How to switch the computer on remotely using the WOL (Wake On LAN) feature Help | How to switch the computer on remotely using the WOL (Wake On LAN) feature